Alternative Epic/6mm Scale Miniatures Thread

Finally got my 32mm bases ready!

STL's here: https://cults3d.com/en/3d-model/game/32mm-round-bases-for-6mm-8mm-miniatures-tech-shanty-texture

BcgiU9P.jpeg

gwokahx.jpeg

tmGKoxe.jpeg

MtzWyPw.jpeg

nMYQWRN.jpeg


Designed for various scifi 6mm / 8mm scaled tabletop wargames, these bases are perfect for mounting cavalry, light vehicles, or objectives.

Not counting the many details, these bases are about 2.25mm thick.

This kit contains the following parts:
- 10x 32mm diameter round bases
- 10x 32mm diameter round bases with 4x holes of 6.10mm
- 40x 5.80mm diameter inserts for holes in the bases (texture matching the base)
- 40x 5.80mm diameter inserts for holes in the bases (matching texture + additional details bits on top)

Please do not share or sell these files (including prints and remixes) without my written permission.

Note that the final picture with the Squid Drones and Warbikes on top only shows what can be done with these bases. Squid Drones and Warbikes are not included in this kit!
 
  • Like
Reactions: Pagumb
Just released these...


Close Combat Brutes

warrio10.jpg

warrio11.jpg



Designed for 6mm/8mm gaming in mind. Compatible with games such as Adeptus Titanicus or Battletech.

This kit contains the following miniatures:
- 10 Close Combat Brutes (with 6mm inserts)
- 10 Close Combat Brutes (without 6mm inserts)

*NOTE: 25mm round bases on picture not included in this set, they are available separately though! *

Please do no share or sell these files (including prints and remixes) without my written permission.
 
After several requests I've decided to also do a modular version of my previously released Beta Hab Blocks.

beta_h10.jpg

beta_h11.jpg

beta_h12.jpg


The Beta Hab Blocks are designed for 6mm / 8mm gaming, think of games such as Battletech, Adeptus Titanicus, or Epic.

This kit is basically a modular version of the previous Beta Hab Blocks I've released. It consists of the following parts:
- 4 entrance components
- 7 level components
- 7 roof components

Please do no share or sell these files (including prints and remixes) without my written permission.

Note that the final picture with the infantry on the roofs only shows how 25mm round bases can fit on the roofs. Infantry and bases not included in this kit.

STL's available here: https://cults3d.com/en/3d-model/game/beta-hab-blocks-modular-kit
 
  • Like
Reactions: Pagumb and Tiny
Another day, another release! Flamethrowers! :)


flamer10.jpg

flamer11.jpg


Designed for 6mm/8mm gaming in mind. Compatible with games such as Adeptus Titanicus or Battletech.

This kit contains the following miniatures:
- 10 Flame Troopers (with 6mm inserts)
- 10 Flame Troopers (without 6mm inserts)

*NOTE: 25mm round bases on picture not included in this set, they are available separately though! *

Please do no share or sell these files (including prints and remixes) without my written permission.
 
  • Like
Reactions: Pagumb
So I started doodling a bit, and ended up doing a set of eight 50mm round bases!


round_15.jpg


Designed for various scifi 6mm / 8mm scaled tabletop wargames, these bases are perfect for mounting vehicles or small mechs.

Not counting the many details, these bases are about 2.25mm thick.

This kit contains the following parts:
- 8x 50mm diameter round bases
- 10x little detail bits to add on your bases

Please do not share or sell these files (including prints and remixes) without my written permission.
 
Another day, another release!

Alpha Hab Block One:


alpha_17.jpg

alpha_18.jpg

alpha_16.jpg


The Alpha Hab Block One is designed for 6mm/8mm gaming, but it could probably be upscaled for 10mm and 15mm scaled gaming as well. This makes the Alpha Hab Tower suitable for games such as Adeptus Titanicus, Dropzone Commander, or Battletech.

The kit contains both single piece as two piece (separate roof) versions of the building.
- 4 single piece Alpha Hab Block One (which each of the 4 roof types)
- 4 separate roofs
- walls put together as a single piece

The dimensions of the buildings are 62.4mm deep and 66.8mm wide. The heights vary (depending on the roof type), but the "walkable" part of the roof is 67.6mm tall.

Note that the final picture with the infantry base only shows how 25mm round based infantry look on and next to the building. Infantry and bases are not included in this kit.

Please do no share or sell these files (including prints and remixes) without my written permission.
 
  • Like
Reactions: Pagumb
Another Alpha Hab Block building? That's right!

ALPHA HAB BLOCK TWO!


alpha_20.jpg

alpha_21.jpg

alpha_19.jpg

The Alpha Hab Block Two is designed for 6mm/8mm gaming, but it could probably be upscaled for 10mm and 15mm scaled gaming as well. This makes the Alpha Hab Block suitable for games such as Adeptus Titanicus, Dropzone Commander, or Battletech.

The kit contains both single piece as two piece (separate roof) versions of the building.
- 3 single piece Alpha Hab Block Two (which each of the 3 roof types)
- 3 separate roofs
- walls put together as a single piece

The dimensions of the buildings are 77.64mm deep and 65.67mm wide. The heights vary (depending on the roof type), but the "walkable" part of the roof is 83.12mm tall.

Note that the final picture with the infantry base only shows how 25mm round based infantry look on and next to the building. Infantry and bases are not included in this kit.

Please do no share or sell these files (including prints and remixes) without my written permission.
 
Another day, and some new (modular) buildings are out! You can basically stack them up as short or tall as you want, depending on how many level components you wanna print out and cram in there. :)

Alpha Hab Block Three:
alpha_22.jpg

The Alpha Hab Blocks are designed for 6mm / 8mm gaming, think of games such as Battletech, Adeptus Titanicus, or Epic.

It consists of the following parts:
- 1 entrance component
- 1 level component
- 3 roof components

Delta Hab Block One:
delta_10.jpg

The Delta Hab Blocks are designed for 6mm / 8mm gaming, think of games such as Battletech, Adeptus Titanicus, or Epic.

It consists of the following parts:
- 1 entrance component
- 1 level component
- 1 roof component

Delta Hab Block Two:
delta_11.jpg

The Delta Hab Blocks are designed for 6mm / 8mm gaming, think of games such as Battletech, Adeptus Titanicus, or Epic.

It consists of the following parts:
- 1 entrance component
- 1 level component
- 1 roof component
 
Really like your armed gang workers. Visually they remind me of what I expected one flavor of the Adeptus Mechanicus army would be when it was announced. Tons of servitors armed a variety of ways with some elites and heavy support servitors to round out the force.
 
  • Like
Reactions: Malika
Those little guys are really cute, they look like little 40k vat-grown Minions or Doozers from Fraggle Rock or something, I'm imagining some Necromunda mad scientist Nemesis type character like Dr Aracnos having a swarm of ankle-high murder-servitors to do his bidding.
 
  • Like
Reactions: Malika and Pagumb
So I did a thing...


h-09_c10.jpg

h-09_c11.jpg

h-09_s10.jpg
 
  • Like
Reactions: Pagumb
Another day, another vehicle!


904-t_12.jpg

904-t_10.jpg

904-t_11.jpg
 
  • Like
Reactions: Pagumb
Noticed I've forgotten to share a few vehicle kits...

P-19 Class Tracked Support Vehicle:
p-19_010.jpg

p-19_011.jpg

p-19_012.jpg



Grav Gondola
grav_g10.jpg

grav_g11.jpg

grav_g12.jpg


 
  • Like
Reactions: Pagumb and Tiny
Maybe next Tribemeet should feature some gondola racing at the agreed upon scale?
 
  • Like
Reactions: Malika
Maybe next Tribemeet should feature some gondola racing at the agreed upon scale?
Now that would be awesome! I am currently working on an armed variant of the grav gondola. Also submitted an armed version of it to Vanguard Miniatures for casting. So you could go totally crazy here :)

I'd say go for 8mm scale, you can then have way larger wastelands. Combine it with my Tech Shanty terrain of Ash Wastes buildings by Grimdark Terrain!