Alternative Epic/6mm Scale Miniatures Thread

[Malika]

New Cybershadow tanks!

Cybershadow – CT-10 APC

A heavily armoured and shielded armoured personnel carrier in common service with Technocracy forces. Sponson mounted disruptors and a twin cannon turret provide defensive firepower.

Set contains:

1 x APC hull

2 x track units

1 x components sprue

Resin cast model.

Overall length 50mms, track length 36mms

Cybershadow – CT-10 APC – Vanguard Miniatures

vanguardminiatures.co.uk

Cybershadow – CT-20 Missile Tank

A variant of the CT-10 APC this “tank” trades its troop carrier ability in order to house a battery of vertically launched missiles, arm mounted twin turrets provide additional firepower.

Set contains:

1 x tank hull

2 x track units

1 x components sprue

Resin cast model.

Overall length 50mms, track length 36mms

Cybershadow – CT-20 Missile Tank – Vanguard Miniatures

vanguardminiatures.co.uk

 

[Malika]

New little terrain piece:

Heavy Ordnance – Energy Cannon

This cannon is the same model as can be used to upgrade the Novan Elites forward operating base bunker model.

We have several planned uses for this model which is why this version comes with power cells that will be a part of a future release.

Set contains:

1 x heavy cannon

2 x cannon armour plates (left and right)

2 x cannon power cells (left and right)

1 x cannon turntable

Notes:

All components are 3D printed resin.
Print supports have been removed but some clean up may still be required.
Novan Elites figure show for scale purposes only and is not included.

Heavy Ordnance – Energy Cannon – Vanguard Miniatures

vanguardminiatures.co.uk

 

[Malika]

Remember the big gun I've shared last week? Apparently it was part of some additional 3D printed terrain kits!

Novan Elites – Forward Operating Base (FOB)

The Novan Elites forward operating base (FOB) is a pre-fabricated modular fortification that can be assembled in many configurations. This set contains the components to assembly one configuration “A” structure with two gatehouses and four defence turret mounts. This model should see further modules released to expand on the theme and open up new layout options.

Set contains:

6 x plain walls

4 x walls with light turret positions

2 x gatehouses

2 x gates

1 x sentry turret sprue

Dimensions: 165mms square, wall height to top of parapet 24mms

Notes:

1) These models have been 3D resin printed and are hollow to reduce weight and material cost, print supports have been removed but some clean up may still be required.
2) Model has been designed to enable magnet use as desired.
3) Various miniatures show for scale purposes only, GW knight shown without permission.

Novan Elites – Forward Operating Base (FOB) – Vanguard Miniatures

vanguardminiatures.co.uk

Novan Elites – FOB Upgrade – Bunker With Dish

This is an upgrade module for the Novan Elites forward operating base model, a heavy bunker that provides the FOB with a powerful multi-function dish.

Set contains:

1 x bunker

1 x bunker roof

I x dish

1 x dish turntable

Dimensions: bunker height not including the dish 45mms, 75mms long on a side, replaces three corner modules.

Notes:

1) All components are 3D resin printed.

2) Print supports have been removed but some tidy up may be required.

3) Some file work will be required to get the roof and dish to sit properly in there locations.

Novan Elites – FOB Upgrade – Bunker With Dish – Vanguard Miniatures

vanguardminiatures.co.uk

 

[Malika]

Four new releases for the Novan Regulars!

Novan Regulars – Warrior II AA

Warrior II has seen many weapons system fitted during its long period of service, this particular variant has an arrangement of two twin heavy machine guns that are often deployed in a light anti-aircraft roll as well as providing a high volume of fire when supporting ground forces in an assault.

Set contains:

3 x warrior II hulls

3 x AA MG turret sprues

Novan Regulars – Warrior II AA – Vanguard Miniatures

vanguardminiatures.co.uk

Novan Regulars – Warrior II ATGM

Warrior II has seen many weapons system fitted during its long period of service, this particular variant has an arrangement of two twin anti-tank guided missile pods providing organic anti-tank capability to the mechanised regiments.

Set contains:

3 x warrior II hulls

3 x ATGM turret sprues

Novan Regulars – Warrior II ATGM – Vanguard Miniatures

vanguardminiatures.co.uk

Novan Regulars – Self-propelled Heavy Siege Mortar

An uncommon sight on the field of battle the self-propelled heavy siege mortar can however be found in very small numbers as assets in most Novan Regulars artillery regiments.

Set contains:

2 x heavy ordnance hulls

12 x siege mortar components sprues

Models painted by Gregory Bailly

Novan Regulars – Self-propelled Heavy Siege Mortar – Vanguard Miniatures

vanguardminiatures.co.uk

Novan Regulars – Desert Cavalry Company Set 2

Native to the Novan world of Syran and domesticated by the population there the Lemac can be found in many desert towns in various roles as well as serving as mounts for native military forces.

Set contains:

10 x Desert Cavalry Squads (30 x models),

1 x Desert Cavalry Command Squad (3 x models)

2 x Desert Cavalry squads with plasma guns (6 x models)

Enough cavalry figures for 13 bases with 3 miniatures per base.

Novan Regulars – Desert Cavalry Company Set 2 – Vanguard Miniatures

vanguardminiatures.co.uk

 

[Malika]

Some more Cybershadow support units are out!

Cybershadow – AS-40

Set contains:

2 x twin laser cannon hulls

2 x twin HMG hulls

4 x left skimmer units

4 x right skimmer units

Four models in total.

Cybershadow – AS-40 – Vanguard Miniatures

vanguardminiatures.co.uk

Cybershadow – AT-35

Set contains:

2 x twin laser cannon hulls

2 x twin HMG hulls

4 x left tracks

4 x right tracks

Four models in total.

Cybershadow – AT-35 – Vanguard Miniatures

vanguardminiatures.co.uk

Cybershadow – IS-10

The Cybershadow self-propelled infantry support weapon system (IS-10) is manned and fielded by the Technocracies Protector infantry forces in the roll of light fire support units. Often seen operating in defence of Cybershadow installations and bases they are a surprisingly effective mobile weapon system. The platform houses a compact micro reactor power core and mounts a twin linked energy cannon, both the IS-10 itself and the operator are protected by an onboard energy shield emitter.

Set contains:

8 x Cybershadow IS-10’s

Cybershadow – IS-10 – Vanguard Miniatures

vanguardminiatures.co.uk

 

[Malika]

A couple 6mm battle walkers releases for today. The Novan Elites Marauder and Novan Regulars Locust stride into battle.

Novan Elites – Marauder (A) Battle Striders

The Marauder was the first “Battle” class Strider created exclusively for the Novan Elites, a very advanced design at the time of its introduction. A fast rugged chassis married to modular weapon pods its longevity in service has been testament to its capabilities.

This (A) variant is armed with a twin medium calibre rotary cannon chin turret and two guided missile batteries in the shoulder pods.

Set contains:

2 x Marauder battle striders

Notes:

These are resin cast models
Figures shown for scale purposes only
Model height 40mms approximately not including antenna
Bases not included

Novan Elites – Marauder (A) Battle Striders – Vanguard Miniatures

vanguardminiatures.co.uk

Novan Regulars – Locust Battle Striders

One of the first “Battle” class Striders deployed by Novan Regulars regiments the Locust is basically an enlarged and upscaled scout strider. The venerable Mk1 has only one weapons hard point like the scout strider that inspired it, and is often now deployed as a heavy recon unit and sometimes as a command vehicle due to the greater internal space (port side) allowing for the fitting of a command and control suite.

The Mk2 has two weapon hardpoints. It is common practise in many regiments to field the Mk1 and Mk2 machines together as a team.

Set contains:

2 x Locust kits (one of each hull variant) with modelling options

Notes:

These are resin cast models
Figures shown for scale purposes only
Model height 35mms approximately
Bases not included

Novan Regulars – Locust Battle Striders – Vanguard Miniatures

vanguardminiatures.co.uk

 

[Malika]

New reinforcements for the Tainted inbound!

Renegade Regulars – Warrior II IFV

The Warrior II is a purpose designed Infantry Fighting Vehicle in common service with many of the great Novan houses, created to transport an infantry squad in relative safety to the front line and to fight alongside that squad when they are dismounted as an infantry armour team. There are several patterns in service and many different weapon systems have been fitted over the years, it is rugged and relatively fast for an armoured transport vehicle two features that have ensured its longevity, with the basic hull seeing development for many other military vehicles such as recon, command, heavy weapons carrier and artillery chassis to name but a few it is sure to remain in service for many years to come.

Set contains:

4 x Warrior II hulls

3 x Warrior II turret and bow MG sprues (fixed hatches)

1 x Warrior II turret and bow MG sprue (separate hatch)

1 x closed hatch

1 x open hatch

Notes:

Model dimensions: Length 27mm, Width 18mm, Height 13mm to top of turret.
Helmet trophy poles not included.
Painted by: Von Krieg Studio

Renegade Regulars – Warrior II IFV – Vanguard Miniatures

vanguardminiatures.co.uk

Renegade – Elementals

Background fluff to follow.

15 x elementals

15 x elementals with breather masks

Painted by: Von Krieg Studio

Renegade – Elementals – Vanguard Miniatures

vanguardminiatures.co.uk

 

[Malika]

A whole bunch of new releases today!

First up: Renegade tanks!

Renegade Regulars – Centurion Tank Squadron (Paris)

The centurion main battle tank is the most common tank used by novan regular forces in the field a rugged and heavily armoured design it has been built to be a reliable and easy to operate vehicle capable of going long periods of time between maintenance cycles making it the perfect machine to equip Tusculum Nova’s armoured divisions. Traits that make these tanks attractive to more nefarious forces also.

The design has seen many weapon fits over the years this variant (Paris configuration) mounts the fearsome plasmic cannon capable of breaching the type of heavy armour worn by novan elite forces this is a rare but extremely potent anti heavy infantry weapon system. The regular forward hull laser cannon is also present on this variant and the optional sponsons usually house the common heavy machine guns for conventional anti infantry duties.

Set contains:

3 x centurion hulls with covered tracks

3 x plasma cannon turret sprues

Renegade Regulars – Centurion Tank Squadron (Paris) – Vanguard Miniatures

vanguardminiatures.co.uk

Renegade Regulars – Centurion Tank Squadron (patroclus)

The centurion main battle tank is the most common tank used by novan regular forces in the field a rugged and heavily armoured design it has been built to be a reliable and easy to operate vehicle capable of going long periods of time between maintenance cycles making it the perfect machine to equip Tusculum Nova’s armoured divisions. Traits that make these tanks attractive to more nefarious forces also.

The design has seen many weapon fits over the years this variant (Patroclus configuration) is a dedication anti light vehicle and infantry hunter armed with a duo auto cannon mount in the turret as well as the regular forward hull laser cannon. The optional sponsons usually house the common heavy machine guns for anti infantry duties.

Set contains:

3 x centurion hulls with exposed tracks

3 x twin autocannon turret sprues

Renegade Regulars – Centurion Tank Squadron (Patroclus) – Vanguard Miniatures

vanguardminiatures.co.uk

Renegade Regulars – Centurion Tank Squadron (Nestor)

The centurion main battle tank is the most common tank used by novan regular forces in the field a rugged and heavily armoured design it has been built to be a reliable and easy to operate vehicle capable of going long periods of time between maintenance cycles making it the perfect machine to equip Tusculum Nova’s armoured divisions. Traits that make these tanks attractive to more nefarious forces also.

The design has seen many weapon fits over the years this variant ( Nestor configuration) is a dedication anti vehicle hunter armed with a duo laser cannon mount in the turret as well as the regular forward hull laser cannon. The optional sponsons in this case also sport laser cannons making for an exceptional multi target engagement platform.

Set contains:

3 x centurion hulls with exposed tracks

3 x twin laser cannon turret sprues

Renegade Regulars -Centurion Tank Squadron (Nestor) – Vanguard Miniatures

vanguardminiatures.co.uk

Renegade Regulars – Centurion Tank Squadron (Ajax)

The centurion main battle tank is the most common tank used by novan regular forces in the field a rugged and heavily armoured design it has been built to be a reliable and easy to operate vehicle capable of going long periods of time between maintenance cycles making it the perfect machine to equip Tusculum Nova’s armoured divisions. Traits that make these tanks attractive to more nefarious forces also.

The design has seen many weapon fits over the years this variant (Ajax configuration) has a demolition mortar in the turret designed to smash defensive enemy bunkers at point blank range, backed up by a fixed forward hull mounted laser cannon. In addition the hull sides can be configured to mount sponson weapons the most common fit on this variant being plasma cannon.

Set contains:

3 x centurion hulls with covered tracks

3 x mortar turret sprues

Renegade Regulars – Centurion Tank Squadron (Ajax) – Vanguard Miniatures

vanguardminiatures.co.uk

Need some extra terrain?

Gothic Dome

A solid resin cast dome formerly available as part of the Basilica Minoris plastic tiles set, now available separately.

1 x resin dome

Notes:
1. Base 50mms square
2. 8mm tall figure shown for size purposes only and is not included

Gothic Dome – Vanguard Miniatures

vanguardminiatures.co.uk

And something for the Skinners!

Skinners – Tractor Vector Utility Vehicle

A light utility tractor in common use with Skinners forces, used primarily to tow artillery pieces and supply trailers, as well as acting as a light run around amongst many other tasks.

Set contains:

3 x tractor vector hulls
3 x engine upgrades
3 x generator modules

Notes:

1. This model is also available in the Skinners heavy artillery set.

Skinners – Tractor Vector Utility Vehicle – Vanguard Miniatures

vanguardminiatures.co.uk

 

[Malika]

A lot of new releases!

First up, the Novan Regulars:

Novan Regulars – Siege Troops Artillery Crews

Crew figures for use with my various artillery pieces (no shells)

Set contains:

22 x ground figures with integral bases
10 x vehicle figures without integral bases

32 figure set

Novan Regulars – Siege Troops Artillery Crews – Vanguard Miniatures

vanguardminiatures.co.uk

Novan Regulars – Short Bow SP Artillery

Novan Regulars – Short Bow SP Artillery – Vanguard Miniatures

vanguardminiatures.co.uk

Novan Regulars – Warrior II Scout

Novan Regulars – Warrior II Scout – Vanguard Miniatures

vanguardminiatures.co.uk

Novan Regulars – Indentured Elementals

Background to follow.

Set contains:

4 x elemental sprues in 5 poses

20 figures in total

Novan Regulars – Indentured Elementals – Vanguard Miniatures

vanguardminiatures.co.uk

Novan Regulars – Static Bombardier

This set contains 3 Static Bombardier on cruciform bases.

Set contents:
3 x bombardier guns
3 x cruciform bases
3 x shell stack
3 x double shells
3 x shell trolley

Novan Regulars – Static Bombardier Battery – Vanguard Miniatures

vanguardminiatures.co.uk

And some extra goodies for the Renegades:

Renegade – Sparta APC

The Sparta is a light APC originally developed for Convent forces but it has also found favour and been adapted by some houses for use with Novan Elites Pathfinders teams who find it’s small size and silenced stealth engines ideal for battlefield recon duties. Some have been pressed into service by various nefarious forces although how they came by them is not known.

Set contains:
4 x Spartas
4 x double sided rear hatches, plain on one side, renegade star on the other.

Model approx. dimensions: length 26mm, width 16mm, height 9mm

Renegade – Sparta APC – Vanguard Miniatures

vanguardminiatures.co.uk

Spiked Trophy Poles With Impaled Elites Helmets

Spiked trophy poles sporting impaled Elites helmets.

Set contains:

3 x trophy pole sprues, 10 poles on each sprue

30 poles in total

Spiked Trophy Poles With Impaled Elites Helmets – Vanguard Miniatures

vanguardminiatures.co.uk

 

[Malika]

Troublemaker Games are running a new Kickstarter, lots of cool plastic and 3D printable terrain, but also interesting proxies for the Imperial Guard and Orks!

Smallscale Plastic Terrain Kits III (+6mm Armies VI + STLs)

Smallscale Plastic Terrain Kits III & 6mm Armies VI & STL 3d File Downloads

www.kickstarter.com

 

[Malika]

Novan Regulars – Self-propelled Heavy Field Mortar Battery

Set contains:

3 x Warrior II artillery hulls
3 x heavy mortar sprues
3 x mortar cradle sprues
6 x siege troops crew
6 x urban troops crew
6 x desert troops crew

Novan Regulars – Self-propelled Heavy Field Mortar Battery – Vanguard Miniatures

vanguardminiatures.co.uk

Novan Regulars – Self-propelled Heavy Quad Launcher Battery

Set contains:

3 x Warrior II artillery hulls
3 x heavy quad launcher sprues
3 x launcher cradle sprues
6 x siege troops crew
6 x urban troops crew
6 x desert troops crew

Novan Regulars – Self-propelled Heavy Quad Launcher Battery – Vanguard Miniatures

vanguardminiatures.co.uk

Renegade Regulars – Centurion Tank (Achilles)

The centurion main battle tank is the most common tank used by Novan regular forces in the field a rugged and heavily armoured design it has been built to be a reliable and easy to operate vehicle capable of going long periods of time between maintenance cycles making it the perfect machine to equip Tusculum Nova’s armoured divisions.

The designs has seen many weapon fits over the years but this variant the (Achilles configuration) boasts a long range version of the standard tank cannon in the turret backed up by a fixed forward hull mounted laser cannon. In addition the hull sides can be configured to mount a sponson weapon most commonly a HMG for close in anti personnel protection.

Pack contains 3 x renegade centurion tanks Achilles configuration with modelling options.

Hull length approx, 30mms

Renegade Regulars – Centurion Tank (Achilles) – Vanguard Miniatures

vanguardminiatures.co.uk

Cybershadow – Praetoria Set 2

The Cybershadow Praetoria as we have designated them are an oddity within the Cybershadow military structure, although they can be seen operating and supporting other Cybershadow forces from time to time they seem to be an independent element not under the main chain of command. Their place within the Technocracy is not fully understood and is still open to some debate within military circles but it is known that they are an extremely aggressive and highly mobile force.

Set contains:

15 x Cybershadow (support) Praetoria in four poses

Cybershadow – Praetoria Set 2 – Vanguard Miniatures

vanguardminiatures.co.uk

Gothic Flying Buttress Set

A set of 8 x resin cast gothic flying buttresses.

Limited edition product.

Notes:

Height: 36mms
Resin colour may vary

Gothic Flying Buttress Set – Vanguard Miniatures

vanguardminiatures.co.uk

 

[Malika]

So the Eloi have just received some major reinforcements...

Eloi Federation – Fire Banshee Detachment

And to give you an idea of size:

The Eloi Federation makes use of a great many battle walker designs, fast, graceful and with incredible agility in comparison to our own battle striders, they are potent and deadly war machines.

This particular design is one of the most prolific machines fielded by Eloi battlegroups, Banshee’s operate in units of three with a piloted command unit and what appears to be two linked drones working in concert, although fully piloted combat teams have also been observed.

Armaments, two arm mounted heavy laser cannon left and right, and two shoulder mounted medium rail cannon. Command units sometimes sacrifice one arm cannon for a close combat weapon instead, a large sword being the most common weapon observed.

Notes:
1. Resin printed multipart models with some modelling options
2. Approximate height, 67mms to top of “wing”
3. Plastic bases not included

Eloi Federation – Fire Banshee Detachment – Vanguard Miniatures

vanguardminiatures.co.uk

 

[Malika]

The first bunch of terrain kits I've designed are now available on my Cults3d!

Type Alpha Logistics Crates:

The Type Alpha Logistics Crates fit perfectly on smallscale terrain. Originally designed for 6mm-8mm scales, it can probably be upscaled for 15mm gaming as well.

Contents:
- 1 closed crate
- 16 opened crates (various types of contents)
- 1 crate handler (figure is about 7.3mm tall)

Download STL file Type Alpha Logistics Crates • Model to 3D print ・ Cults

The Type Alpha Logistics Crates fit perfectly on smallscale terrain. Originally designed for 6mm-8mm scales, it can probably be upscaled for 15mm gaming as well. Contents: - 1 closed crate - 16 opened crates (various types of contents) - 1 crate handler (figure is about 7.3mm tall) Please do...

cults3d.com

Type Beta Logistics Crates:

The Type Beta Logistics Crates fit perfectly on smallscale terrain. Originally designed for 6mm-8mm scales, it can probably be upscaled for 15mm gaming as well.

Contents:
- 1 closed crate
- 10 opened crates (various types of contents)
- 6 combinations of stacked crates
- 1 crate handler (figure is about 7.4mm tall)

Download STL file Type Beta Logistics Crates • 3D printing object ・ Cults

The Type Beta Logistics Crates fit perfectly on smallscale terrain. Originally designed for 6mm-8mm scales, it can probably be upscaled for 15mm gaming as well. Contents: - 1 closed crate - 10 opened crates (various types of contents) - 6 combinations of stacked crates - 1 crate handler (figure...

cults3d.com

Type Gamma Logistics Crates:

The Type Gamma Logistics Crates fit perfectly on smallscale terrain. Originally designed for 6mm-8mm scales, it can probably be upscaled for 15mm gaming as well.

Contents:
- 1 closed crate
- 15 opened crates (various types of contents)
- 1 crate handler (figure is about 7.3mm tall)
- 8 combinations of stacked crates

Download STL file Type Gamma Logistics Crates • Object to 3D print ・ Cults

The Type Gamma Logistics Crates fit perfectly on smallscale terrain. Originally designed for 6mm-8mm scales, it can probably be upscaled for 15mm gaming as well. Contents: - 1 closed crate - 15 opened crates (various types of contents) - 1 crate handler (figure is about 7.3mm tall) - 8...

cults3d.com

Type Delta Logistics Crates:

The Type Delta Logistics Crates fit perfectly on smallscale terrain. Originally designed for 6mm-8mm scales, it can probably be upscaled for 15mm gaming as well.

Contents:
- 1 closed crate
- 10 combinations of stacked crates
- 2 crate handlers (each little less than 7.5mm tall)

Download STL file Type Delta Logistics Crates • 3D printable design ・ Cults

The Type Delta Logistics Crates fit perfectly on smallscale terrain. Originally designed for 6mm-8mm scales, it can probably be upscaled for 15mm gaming as well. Contents: - 1 closed crate - 10 combinations of stacked crates - 2 crate handlers (each little less than 7.5mm tall) Please do not...

cults3d.com

Type Alpha Transport Drums:

The Type Alpha Transport Drums fit perfectly on smallscale terrain. Originally designed for 6mm-8mm scales, it can probably be upscaled for 15mm gaming as well.

Contents:
- 1 individual transport drum
- 5 combinations of transport drums stacked on top of each other
- 5 combinations of transport drums stacked next one another
- 1 handler (figure is about 7.2mm tall)

Download STL file Type Alpha Transport Drums • 3D print design ・ Cults

The Type Alpha Transport Drums fit perfectly on smallscale terrain. Originally designed for 6mm-8mm scales, it can probably be upscaled for 15mm gaming as well. Contents: - 1 individual transport drum - 5 combinations of transport drums stacked on top of each other - 5 combinations of transport...

cults3d.com

Type Beta Transport Drums:

The Type Beta Transport Drums fit perfectly on smallscale terrain. Originally designed for 6mm-8mm scales, it can probably be upscaled for 15mm gaming as well.

Contents:
- 1 individual transport drum
- 5 combinations of transport drums stacked on top of each other
- 5 combinations of transport drums stacked next one another
- 1 handler (figure is about 6.9mm tall)

Download STL file Type Beta Transport Drums • 3D printable object ・ Cults

The Type Beta Transport Drums fit perfectly on smallscale terrain. Originally designed for 6mm-8mm scales, it can probably be upscaled for 15mm gaming as well. Contents: - 1 individual transport drum - 5 combinations of transport drums stacked on top of each other - 5 combinations of transport...

cults3d.com

 

[Malika]

Simple free sample pack!

FREE SAMPLES (SEPT. 2021)

Just some free samples for you guys to try out. The kit contains:
- 1 drunk worker
- 1 potted cactus
- 1 closed Type Alpha Logistics Crate
- 1 empty Type Beta Logistics Crate

Download free STL file Free samples (sept. 2021) • 3D print object ・ Cults

Just some free samples for you guys to try out. The kit contains: - 1 drunk worker - 1 potted cactus - 1 closed Type Alpha Logistics Crate - 1 empty Type Beta Logistics Crate Please do not share of sell these files without my written permission!

cults3d.com

 

[Malika]

NEW FACTION RELEASED!!!

This is going to be the first batch of a new faction on Vanguard Miniatures' Dominion setting.

Sentinel – Command

Set contains:

3 x Commanders

6 x Sub-commanders

4 x Guardians

6 x Techs

6 x Drones

Notes:

Sample of contents shown
Plastic base not included

Sentinel – Command – Vanguard Miniatures

vanguardminiatures.co.uk

Sentinel – Infantry

Set contains:

40 x Sentinel infantry

6 x Sentinel casualties

Notes:

Plastic bases not included

Sentinel – Infantry – Vanguard Miniatures

vanguardminiatures.co.uk

Sentinel – Heavy Infantry

Set contains:

40 x heavy infantry

2 x heavy infantry casualties

Notes:

Plastic bases not included

Sentinel – Heavy Infantry – Vanguard Miniatures

vanguardminiatures.co.uk

Sentinel – Swarm Dominus

Set contains:

3 x swarm dominus

5 x swarm sprues (15 swarm discs)

Sentinel – Swarm Dominus – Vanguard Miniatures

vanguardminiatures.co.uk

 

[Malika]

New release!

Smallscale Shipping Containers (Type Alpha):

Various types of shipping containers are found throughout the human colonies. The Type Alpha Shipping Container is one of these. Besides being used to transport goods, it also has a market stand variant.

This modular container designed for 6mm/8mm scaled gaming, so it would fit perfectly with stuff like Adeptus Titanicus or Battletech. But it could probably be upscaled to larger scales as well.

The kit contains the following parts:
- standard shipping container (19.75mm long x 13.5mm tall x 11mm wide)
- ventilated shipping container
- long shipping container (39.5mm long x 13.5mm tall x 11mm wide)
- 6 types of standard containers converted into market stands
- 8 types of container hatches

Download STL file Smallscale Shipping Containers Type Alpha • 3D printer design ・ Cults

Various types of shipping containers are found throughout the human colonies. The Type Alpha Shipping Container is one of these. Besides being used to transport goods, it also has a market stand variant. This modular container designed for 6mm/8mm scaled gaming, so it would fit perfectly with...

cults3d.com

 

[Malika]

Need some civilian shuttles for your Titans to stomp on?

Scarab class civilian shuttle

The Scarab class civilian shuttle is designed for smallscale (6mm / 8mm) gaming, making it compatible for games such as Adeptus Titanicus, Battletech, Aeronautica Imperialis, X-Wing and others.

The kit contains the following parts:
- 3x hulls (landing gears out, landing gears in, separate landing gears)
- separate landing gears
- 2x crew members

https://cults3d.com/en/3d-model/game/scarab-class-civilian-shuttle

Beetle class civilian shuttle

The Beetle class civilian shuttle is designed for smallscale (6mm / 8mm) gaming, making it compatible for games such as Adeptus Titanicus, Battletech, Aeronautica Imperialis, X-Wing and others.

The kit contains the following parts:
- 3x hulls (landing gears out, landing gears in, separate landing gears)
- 2x engines
- 3x hatches (closed, opened, crew member walking out)
- separate landing gears
- crew member

https://cults3d.com/en/3d-model/game/beetle-class-civilian-shuttle