The wheels were done in plasticard, IIRC 1.5mm.
Cut a circle the same size as a GW wheel using a circle cutter. Then line up the GW wheel over the top and mark the holes.
The holes were punched through using a leather punch then trimmed to the right shape.
I then cut a hoop of plasticard to stick to the back side of the wheel, I did this to make it wider so the rim had something to stick to.
The rim was then made from a strip of 1mm plastcard which was bent round and glued. Then the rim was finished with 6 x smaller strips of 1mm equally spaced round the circumference of the rim.
Lastly the face of the wheel was detailed with smaller circles for the hub and tiny plastic rod (still a few more struts to be finished).
Reading this back makes it sound much harder than it was. But I do need to make more as I realised that the 2 here are not exactly the same size.
When I make some more I'll make a step by step tutorial as I go.