New models incoming

Schnitzel, potato coating, rolled in egg to bind, rolled in panko, fried until golden and crispy. Thank me later.
 
The lofty goal to include all ethnicities falls flat on the face when you just work with ten models. According to organizations like Ethnologue catalog the world's spoken languages, often serving as a proxy for cultural groups, are currently document over 7,000 distinct languages. So just doing a Caucasian, Asian and Sub-Saharan African isn´t good enough.
Yes, but GW figured out you only need to put a token effort into making a handful of vaguely "foreign" looking ones to get the DSG score up.
 
Despite the (as has already been mentioned) boring poses, the Ogryns are lovely - must buy for me.

The rest of the Orlocks are - frankly - disappointing. The biker gang style falls flat, and it's not just the faces that seem blobby and ill-sculpted. Even the bodies and legs seem uninspired.
 
I don't mind the new Orlocks, but since I have a ton of Orlocks already I'm going to wait and see what the journal says the benefits are. The Road Srgs/Cyber Mastiffs are definitely better in my mind than the Road Warrior sculpts- I like the older warrior look. Ogryns are alright, no complaints there.
 
  • Like
Reactions: Mr. M
Scotch eggs are a remarkable thing (...) Must be something in the air.
Yeah, the gas produced after consuming a Scotch Egg. It's the only way to get the epiphany that instructs you on making the Golden Orb. It's mildly hallucinogenic and extremely toxic though. My girlfriend of the time was never quite the same after a 400 mile road trip with three guys who had consumed irresponsibly aged Scotch Eggs pre-journey. Poor girl had to move to Australia.
 
I went into GW today to try these new 'Pro' paints. They only had a small selection, which made it hard to test everything. (And the brushes they had were in rather poor condition too, probably down to lots of new painter tutorials.) Still, they did seem to go on fairly nicely with good coverage.

Has the price been confirmed? I overheard one of the staff say £4.10 per pot I think it was. (Possibly £4.20, but in that ballpark.) That's what, about 50% more than their current range...
 
  • Like
Reactions: Tiny
So Ripper Bolgrot and Fungus the Loon are now getting new plastic miniatures. With a number of the Necromunda hangers on also being rendered in plastic, it looks like GW are trying to move definitively away from resin - is that known GW policy (and am I just slow on the uptake)?
 
So Ripper Bolgrot and Fungus the Loon are now getting new plastic miniatures. With a number of the Necromunda hangers on also being rendered in plastic, it looks like GW are trying to move definitively away from resin - is that known GW policy (and am I just slow on the uptake)?
If you remember GW´s "Failcast" era then you know why they desperately want to get away from that material.
 
  • Like
Reactions: Malevolent Pink Cat
I don't think it's ever been announced, but it's fairly obvious. They've been replacing metal/resin with plastic for years. I don't think they've ever replaced plastic models with metal/resin ones.

I don't like either of the new BB models, though the TK horsemen (for TOW) are nice enough.
 
  • Like
Reactions: Malevolent Pink Cat
So Ripper Bolgrot and Fungus the Loon are now getting new plastic miniatures. With a number of the Necromunda hangers on also being rendered in plastic, it looks like GW are trying to move definitively away from resin - is that known GW policy (and am I just slow on the uptake)?
I don’t think they’ve ever announced it as such but it’s pretty obvious that anything that they can make plastic, they will.

To that end limited run games and new box sets seem to be the place where they can push models they may not have high sales knowing that they can recoup the cost quicker of the mold tooling.

I bet 3D design aids this quicker as initial resins can then be reworked into plastic easier.

Finecast… well it was around 2012, was designed to replace metals - didn’t really work as intended and the branding was phased out over time. You can still get models in that material (or a reformulated version, the OG stuff was horrendously bubbly) and occasionally they do old metals but they’re just cash-in nostalgia things really.

ForgeWorld resin most people are more used to is the nice greyish one that much of Necromunda models came in. Its handy for them add they can do short runs of models in it but it’s a lot more expensive than it should be. Interestingly (or not) ForgeWorld has and still does use several resins from a cream coloured one, a “vanilla” coloured one, a darker grey and something that looks like the FineCast mix depending on what it is they’re making.

Most popular FW ranges get moved to plastic over time. Plastic is what GW have invested heavily in and I think that’s what they want to do solely.

3D printing might change things there though.
 
I don’t think they’ve ever announced it as such but it’s pretty obvious that anything that they can make plastic, they will.

To that end limited run games and new box sets seem to be the place where they can push models they may not have high sales knowing that they can recoup the cost quicker of the mold tooling.

I bet 3D design aids this quicker as initial resins can then be reworked into plastic easier.

Finecast… well it was around 2012, was designed to replace metals - didn’t really work as intended and the branding was phased out over time. You can still get models in that material (or a reformulated version, the OG stuff was horrendously bubbly) and occasionally they do old metals but they’re just cash-in nostalgia things really.

ForgeWorld resin most people are more used to is the nice greyish one that much of Necromunda models came in. Its handy for them add they can do short runs of models in it but it’s a lot more expensive than it should be. Interestingly (or not) ForgeWorld has and still does use several resins from a cream coloured one, a “vanilla” coloured one, a darker grey and something that looks like the FineCast mix depending on what it is they’re making.

Most popular FW ranges get moved to plastic over time. Plastic is what GW have invested heavily in and I think that’s what they want to do solely.

3D printing might change things there though.
Thank you, appreciate the detailed (and very interesting) response. I guess in my head I'm still at the 2 plastic releases every 6 months for nexromunda.
 
  • Like
Reactions: MusingWarboss